99re6这里只有精品视频在线观看,性色AV蜜色av色欲av麻豆,在线观看亚洲欧美不卡视频,亚洲AV成人片色在线观看www,美女高潮呻吟声亚洲动漫一区二区

Foshan Xendoll Intelligent Technology Co., Ltd.

What is a small CNC lathe replacement row tool?

Add Date: 2022/10/17    Views: 511

Small CNC lathe in use for a period of time, in order to better complete the processing, to often maintain, so what is the small CNC lathe to replace the row tool?

Ensure that the Z-axis direction tool does not collide with the chuck:
Small CNC lathe processing in order to enhance the rigidity of workpiece, usually a component can have different kinds of technological process, the different parts of the process, the production efficiency, processing costs and processing accuracy often have significant difference, so we should be on the premise of guarantee the quality of parts processing, according to the specific conditions of production, improve production efficiency and reduce the production cost as far as possible, Develop a reasonable processing technology. Generally always make the workpiece out of the only possible short, cutting parts may only be close to the chuck, when the need for several knife work, there must be a knife in the turning will be close to the chuck; As long as the "knife close to the chuck" does not collide with the chuck, the rest of the knives will not be a problem.

How to arrange the tool of CNC lathe
Therefore, small CNC lathe tool loading should be controlled from two aspects:
1, to ensure that the "knife close to the chuck" in Z to extend the amount of the rest of the knife can be the same or less, but not more than it.
2. The distance between the other knives and the "knife close to the chuck" in the Z direction can only be less than (or equal to) the size of the corresponding part on the drawing. Must not be larger than the corresponding size on the drawing.

In order to make full use of the X-direction space, it is possible to use only crosswise mounted cutters (i.e., cutters oriented parallel to the Z-axis), and cutters oriented perpendicular to the Z-axis can be positioned either in front or behind.

Small CNC lathes at the same time using the normal way of processing tools and "working in the negative X axis area" of the tool, can make the tool layout more convenient, in the machine tool X axis stroke appears tense should be so.

When two adjacent knife tips are in the "face to face" situation, the spacing in the X direction of installation only takes into account the space occupied by the workpiece in the X direction (plus the necessary retreat distance). In order to improve the production efficiency of CNC lathe, first of all, we must carefully analyze the parts processed by CNC lathe, make clear the material, structural characteristics and shape and position tolerance requirements of parts, roughness, heat treatment and other technical requirements. Then on this basis, select reasonable milling process and simple processing route.

News

Copyright ? All Rights Reserved.   備案/許可證號(hào): 粵ICP備20047778號(hào)-1
+86-757-28386038
+86-13928219122
eva.zhou@xendoll.com
99re6这里只有精品视频在线观看,性色AV蜜色av色欲av麻豆,在线观看亚洲欧美不卡视频,亚洲AV成人片色在线观看www,美女高潮呻吟声亚洲动漫一区二区